Aeroseal Adhesive

AEROFLEX AEROSEAL FAST-TACK ADHESIVE

DESCRIPTION
Aeroseal is a solvent-based contact adhesive specially formulated for vapor-sealing adjoining seams of Aeroflex tube, sheet and roll insulation and also for bonding Aeroflex insulation to a variety of flat and curved surfaces. Provides immediate bond to metal, PVC melamine and other approved substrates. Suitable for continuous operating temperatures up to 257°F (125°C) on piping and 200°F (93°C) sheets & rolls.

KEY BENEFITS
Strong, tenacious bonds
Fast tack — sets up in 1 to 3 minutes, depending on jobsite conditions
Provides immediate vapor seal at seams
Easy to apply with brush or short-nap roller
Protects piping and equipment by reducing the potential of corrosion under insulation (CUI)
Aeroflex Protape, Aerocoat, tapes and coatings can be applied immediately after installation

PERFORMANCE PROPERTIES
Service Temperature Range: -20°F (-29°C) to +257°F (+125°C)
Coverage: approximately 200 ft2/gal
Tack Time: 1-3 minutes (tacky to the touch)
Application Temperature Range: from 40°F (4°C ) and to 100°F (38°C)
Flame/Smoke: flame = 10, Smoke = 0
Dry Time: none, immediate
Shelf Life: 1 year
VOC content: 615 g/L

Available in Amber color only.
Container Sizes:
250 ML, 500 ML, with brush-top.

Aeroseal Adhesive

APPLICATIONS Refrigeration piping & equipment HVAC and VRF piping & equipment HVAC ductwork Chilled water piping & equipment Plumbing piping & equipment

AEROFLEX EPDM RUBBER INSULATION SYSTEMS

AEROFLEX Insulation can be used on any piping system whether it’s Copper, Steel, Plastic, Solar piping, Hydronic heating piping, HVAC systems, Chilled water pipes and Sound deadening. A large variety of Aeroflex products are available allowing you to choose the product that best fits your needs. All Aeroflex thermal pipe insulation are high performance in relation to operating temperature, thermal conductivity, non-toxicity and moisture absorption. Fire performance, Noise reduction, Resistant to most chemicals, large range of sizes and wall thickness, availability and cost are factors which will usually lead to the selection of a specific grade of Aeroflex pipe insulation. Aeroflex Pipe Insulation is widely specified and used for domestic, commercial, and industrial projects in Australia and overseas by specifiers for small and large scale projects.