S-5 Gripperfix® Utility System
Maintain Roof Warranties, Avoid Destructive Corrosion and Build a System to Last the Life of the Roof.
Still Mounting Rooftop Ancillaries With Wood Blocking or Concrete Blocks for Ballast?
Still Mounting Rooftop Ancillaries With Wood Blocking or Concrete Blocks for Ballast?
Common methods of securing rooftop utilities, such as satellite dishes and HVAC units, include wood or steel blocking and/or concrete blocks (for ballast) to secure equipment to the roof. These methods cause corrosive effects and other issues on metal roofs, compromising both the equipment as well as the integrity of the roof itself. With the Universal GRIPPERFIX System, you can achieve a secure and dependable attachment, while preserving the integrity of your metal roof – and for lower costs than all the “wrong ways”!usechatgpt init success
Why Choose the GRIPPERFIX Utility Mounting System?
Metal roofing offers a durable and maintenance-free roofing solution. Its lifespan is significantly reduced when inferior rooftop mounting is performed. GRIPPERFIX is a convenient method for attaching rooftop ancillaries without compromising roof integrity, warranties or safety. GRIPPERFIX provides the cost-effective, secure, rust-free and long-lasting metal rooftop mount you need.
Durable and Reliable
Made from 6000 series aluminum with stainless steel hardware designed to last the life of the roof. Factory-applied, EPDM sealant with exposed-fasten application.
Installs in Minutes
Designed with ease of installation in mind – two struts with hardware can be installed in under seven minutes.
Versatile Mounting for Almost Any Application
Adjustable in both axes; mount anywhere on the roof with any number of anchorages desired. Load distribution over multiple bearing points.
GRIPPERFIX Is Available for Your Standing Seam and Exposed-Fastened Metal Roofs
Long-term metal roofs deserve long-term, durable attachment methods. GRIPPERFIX is a perfect fix for installing HVAC, satellite dishes, light fixtures, conduit, service walkways, solar PV power electronics and other rooftop utilities. GRIPPERFIX offers a zero-penetration attachment solution for standing seam and other concealed-fastened roofs. GRIPPERFIX securely attaches to exposed-fastened roofs too, while still allowing free drainage beneath the system.
GRIPPERFIX for Stanfing Seam
GRIPPERFIX for Exposed Fixing
Simplify utility attachment with patented, non-penetrating S-5! clamp and GRIPPERFIX technology. The GRIPPERFIX system is compatible with all standing seam metal roof profiles.
Choose a safe and cost-effective rooftop attachment system that requires only the strut, S-5! Mini clamps and Concealed-Fastened (CF) Tabs. Just slide the tabs into the strut and attach to the top of the clamp with stainless bolts provided.
GRIPPERFIX Components for Standing Seam Profiles
GRIPPERFIX consists of several components, enabling customization to your roof and application.
Note: All components are sold separately.
Gripperfix Rail 1.2m
Unique design w/ channels for adjustments and placement on roof. Stock length 1.2meters (1200 mm).
Concealed-Fix (CF) Tab
Slotted hole allows for adjustment. Special design interlocks securely with the strut.
Damper/Leveling Pad
(6 mm) EPDM pad to absorb vibration from HVAC units. Multiple pads can be stacked to level the unit on sloped roofs. Keyhole slot for easy insertion over bolts.
M8 Bolt
Choose from an M8 1.25 x 16, 20 or 40 mm bolt.
Mini Clamp (Example)
Select the appropriate Mini clamp for your specific roof profile.
Hex Flange Nut
M8 1.25 flange nut to accompany chosen bolt length – 16, 20 or 40 mm
GRIPPERFIX Components for Exposed-Fastened Profiles
GRIPPERFIX consists of several components, enabling customization to your roof and application.
Note: All components are sold separately.
Gripperfix Rail 1.2m
Unique design w/ channels for adjustments and placement on roof. Stock length 1.2meters (1200 mm).
Fastener Clip (FC) Tab
Special design interlocks securely with the strut. Tab comes with a factory-applied, EPDM rubber gasket. Two self-piercing screws included.
Damper/Leveling Pad
(6 mm) EPDM pad to absorb vibration from HVAC units. Multiple pads can be stacked to level the unit on sloped roofs. Keyhole slot for easy insertion over bolts.
Piercing Fastner
Stainless-capped, piercing fastener with EPDM washer. Corrosion-resistant coated steel shaft designed to outlast the life of the roof.
M8 Bolt
Choose from an M8 1.25 x 16, 20 or 40 mm bolt.
Hex Flange Nut
M8 1.25 flange nut to accompany chosen bolt length – 16, 20 or 40 mm.
Product Specification
- Universal utility mounting system
- No penetration of standing seam roof
- No field-applied sealants needed for exposed-fastened roof
- Ease of installation – in just 7 minutes
- All aluminum & stainless components
- Eliminates corrosion and rust
- No damage to roof system
- Use as many tabs as needed for your specific utility application
- Load distribution over multiple bearing points (panel ribs)
- Free flow of rainwater under rails
- AND – lower cost than the wrong way!
System Pricing Varies With Application
What Can You Mount With Gripper Fix
You can mount a variety of ancillaries to your standing seam or exposed-fastened metal roof: microinverters, satellite dishes, conduit, junction boxes, HVAC and much more.
Condensor Rooftop Mounting
Satellite Dish Rooftop Mounting
Pipes/Conduit Rooftop Mounting
Condensor Rooftop Mounting
Condensing-type units don’t always need to duct through the roof. Sometimes they simply need a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn’t move? GRIPPERFIX it in 7 minutes!
Satellite Dish Roof Top Mounting
Corrosion resulting from pooling water, leaching concrete (causing rust) and rotting timber are all prime reasons to use a non-damaging rooftop mount.
Pipes/Conduit Roof Top Mounting
Eliminate unsightly and corrosive wood blocking when mounting the following: gas piping, electrical conduit and condensate lines.
How to Install GRIPPERFIX on Your Roof Profile*
Standing Seam Roof
Install the first two clamps, slide the tab into the strut channel and attach the strut to the clamps. Slide M8 bolts into the slot and place ancillary item over bolts to complete assembly.
Exposed-Fastened
Slide the EF tab into the strut channel. Partially fasten first strut to the roof ribs. Slide M8 bolts into slot. Place ancillary mounting holes over bolt and fasten second strut to roof ribs.