Aeroflex Sheet Insulation

AEROFLEX SHEETS

Available in sheets from 6mm to 25mm thickness at 910mm wide x 1200mm long depending on thickness. All insulation sheets are made from the same materials as Aeroflex tubing. Besides being the ideal insulation for chilled and hot water piping, Aeroflex is also used as insulation for all kinds of ducting systems. Not only saving energy, but also serves as an acoustic absorber and reducing noise generated by equipment, air movement, and the expansion and contraction noise of sheet metal duct. Aeroflex has been favoured over fibrous insulating materials mainly because of the possible dangers and health hazards caused by fibrous materials. Aeroflex made from special modified elastomeric material ensures long service life and can be safely handled without any danger of skin irritation. It is also not hazardous to health, so no special precaution is needed. Aeroflex has superior resistance against moisture, fungus growth, vermin and rodent attack. Not messy and easy to install, it is also neat in appearance of its smooth surface. With low water absorption and low moisture transmission, Aeroflex can be used both as an internal and external insulation for all kinds of ducting systems.

Shop Online

06mm x 910mm x 1200mm 09mm x 910mm x 1200mm 13mm x 910mm x 1200mm 20mm x 910mm x 1200mm 25mm x 910mm x 1200mm

AEROFLEX STANDARD 125c SPECIFICATIONS

Main features

High quality synthetic EPDM-based elastomer completely closed-cell structure
Excellent UV resistance
Thickness 6mm to 25mm
Dimensions 910mm wide x 1200mm Long
CFC-free and PVC-free
High weather and ozone resistance
Aeroflex Standard up to -57c to 125c
Operating temperature
Retains flexibility at temperatures as low as -40 degree C
Lambda value 0.039 W/m*K or better at +40 degrees C
Self-extinguishing according to UP94-VO standard, no fireball drops
Does not cause copper or stainless steel corrosion
<5 ppb (0.005 ppm) Nitrosamine content

Fire Rating

Aeroflex to Australian Standard AS1530.3 – 1999
Ignitability Index – 0 (range 0 – 20)
Spread of Flame Index – 0 (range 0 – 10)
Heat Evolved Index – 0 (range 0 – 10)
Smoke Developed Index – 3 (range 0 – 10)
To be read in conjunction with the Building Code of Australia

AEROFLEX EPDM RUBBER INSULATION SYSTEMS

AEROFLEX Insulation can be used on any piping system whether it’s Copper, Steel, Plastic, Solar piping, Hydronic heating piping, HVAC systems, Chilled water pipes and Sound deadening. A large variety of Aeroflex products are available allowing you to choose the product that best fits your needs. All Aeroflex thermal pipe insulation are high performance in relation to operating temperature, thermal conductivity, non-toxicity and moisture absorption. Fire performance, Noise reduction, Resistant to most chemicals, large range of sizes and wall thickness, availability and cost are factors which will usually lead to the selection of a specific grade of Aeroflex pipe insulation. Aeroflex Pipe Insulation is widely specified and used for domestic, commercial, and industrial projects in Australia and overseas by specifiers for small and large scale projects.