Stack of Aeroflex pre-cut insulation sheets

AEROFLEX SHEETS

Available in sheets from 6mm to 25mm thickness at 910mm wide x 1200mm long depending on thickness. All insulation sheets are made from the same materials as Aeroflex tubing. Besides being the ideal insulation for chilled and hot water piping, Aeroflex is also used as insulation for all kinds of ducting systems. Not only saving energy, but also serves as an acoustic absorber and reducing noise generated by equipment, air movement, and the expansion and contraction noise of sheet metal duct. Aeroflex has been favoured over fibrous insulating materials mainly because of the possible dangers and health hazards caused by fibrous materials. Aeroflex made from special modified elastomeric material ensures long service life and can be safely handled without any danger of skin irritation. It is also not hazardous to health, so no special precaution is needed. Aeroflex has superior resistance against moisture, fungus growth, vermin and rodent attack. Not messy and easy to install, it is also neat in appearance of its smooth surface. With low water absorption and low moisture transmission, Aeroflex can be used both as an internal and external insulation for all kinds of ducting systems.

Aeroflex insulation sheets in several thicknesses

Shop Online

06mm x 910mm x 1200mm 09mm x 910mm x 1200mm 13mm x 910mm x 1200mm 20mm x 910mm x 1200mm 25mm x 910mm x 1200mm

Aeroflex Insulation Sheet Sizes

Aeroflex flat sheet is closed-cell EPDM rubber foam, supplied in 910mm x 1200mm sheets from 6mm to 25mm thick. Cut it to fit ducts, tanks, vessels, chillers and irregular fittings where pipe insulation tube will not fit.

6mm insulation sheet

910mm x 1200mm EPDM sheet

Thin lining for small ducts, equipment panels and condensation control on cool surfaces.

Shop 6mm sheet

9mm insulation sheet

910mm x 1200mm EPDM sheet

General-purpose thickness for ductwork and small tanks.

Shop 9mm sheet

13mm insulation sheet

910mm x 1200mm EPDM sheet

Popular choice for air conditioning ductwork and hot water tanks.

Shop 13mm sheet

20mm insulation sheet

910mm x 1200mm EPDM sheet

For chilled water equipment, larger vessels and colder surfaces.

Shop 20mm sheet

25mm insulation sheet

910mm x 1200mm EPDM sheet

Maximum sheet thickness for chillers, cold tanks and high-condensation risk areas.

Shop 25mm sheet

Covering large areas? Aeroflex sheet rolls come 1m wide in continuous lengths, from 10mm to 50mm thick.

Shop Aeroflex insulation sheets
Shop Aeroflex sheet rolls

Where to Use Aeroflex Insulation Sheet

Ductwork

Internal or external insulation for air conditioning and ventilation ducts. Low water absorption suits both.

Tanks & vessels

Hot water tanks, chilled water vessels and buffer tanks. The sheet bends around curves and irregular shapes.

Chillers & large fittings

Valves, pumps, flanges and chiller bodies that pipe insulation tube cannot cover.

Noise reduction

EPDM foam absorbs noise from equipment, air movement and the expansion and contraction of sheet metal ducts.

AEROFLEX STANDARD 125c SPECIFICATIONS

 Main features

  • High quality synthetic EPDM-based elastomer completely closed-cell structure
  • Excellent UV resistance
  • Thickness 6mm to 25mm
  • Dimensions 910mm wide x 1200mm Long
  • CFC-free and PVC-free
  • High weather and ozone resistance
  • Aeroflex Standard up to -57c to 125c
  • Operating temperature
  • Retains flexibility at temperatures as low as -40 degree C
  • Lambda value 0.039 W/m*K or better at +40 degrees C
  • Self-extinguishing according to UP94-VO standard, no fireball drops
  • Does not cause copper or stainless steel corrosion
  • <5 ppb (0.005 ppm) Nitrosamine content

      Fire Rating

  • Aeroflex to Australian Standard AS1530.3 – 1999
  • Ignitability Index – 0 (range 0 – 20)
  • Spread of Flame Index – 0 (range 0 – 10)
  • Heat Evolved Index – 0 (range 0 – 10)
  • Smoke Developed Index – 3 (range 0 – 10)
  • To be read in conjunction with the Building Code of Australia
Valves and pipes insulated with black Aeroflex sheet
Pipe Insulation Australian Sun Energy

AEROFLEX EPDM RUBBER INSULATION SYSTEMS

AEROFLEX Insulation can be used on any piping system whether it’s Copper, Steel, Plastic, Solar piping, Hydronic heating piping, HVAC systems, Chilled water pipes and Sound deadening. A large variety of Aeroflex products are available allowing you to choose the product that best fits your needs. All Aeroflex thermal pipe insulation are high performance in relation to operating temperature, thermal conductivity, non-toxicity and moisture absorption. Fire performance, Noise reduction, Resistant to most chemicals, large range of sizes and wall thickness, availability and cost are factors which will usually lead to the selection of a specific grade of Aeroflex pipe insulation. Aeroflex Pipe Insulation is widely specified and used for domestic, commercial, and industrial projects in Australia and overseas by specifiers for small and large scale projects.

Aeroflex Insulation Sheet FAQs

Flat sheets are 910mm x 1200mm in 6mm, 9mm, 13mm, 20mm and 25mm thickness. For larger areas, sheet rolls are 1m wide in 10mm to 50mm thickness.

Sheets suit smaller jobs, fittings and tanks. Rolls cut down joins on long duct runs and large surfaces.

Bond seams and joins with Aeroseal contact adhesive, then seal with Aeroflex insulation tape for a vapour-tight finish.

Yes. Aeroflex is tested to AS 1530.3: Ignitability 0, Spread of Flame 0, Heat Evolved 0 and Smoke Developed 3. Read in conjunction with the Building Code of Australia.

Yes. Aeroflex EPDM has excellent UV, weather and ozone resistance, so it suits outdoor ducts and tanks.