Aeroflex Aerofix Hanger Blocks

AEROFIX PIPE BLOCKS

DESCRIPTION

Aerofix patented insulated pipe supports provide seamless, EPDM thermal performance and zero-perm moisture resistance without worries of insulation compression and thermal bridging at hanger locations.

A rigid, polymeric core is lined with closed-cell EPDM foam rubber and encased with a zero-perm, weather-proof and corrosion-proof EPDM membrane. A built-in, self-seal Aeroflex Protape® closure ensures seamless EPDM protection and fast installation.

Each self-contained, three-piece assembly is zero-perm, resistant to UV degradation, condensation, and heat gain. Suitable for continuous service temperatures ranging from -328°F to 257°F (-200°C to 125°C). May be used with trapeze (strut), split-ring, clevis, roller, clamps, and straphangers.

Available in a wide range of pipe diameters and thicknesses up to 300mm IPS and 50mm wall thickness. See data sheet for more details.

KEY BENEFITS

APPLICATIONS

High strength, load bearing — will not crush under active pipe loads
Fully hermetic solution
Prevents thermal bridging
Reduces potential for under-insulation corrosion (CUI)
Saves installation labor
Resistant to UV, condensation and heat gain
Absorbs piping vibration
Works with common pipe hanger systems

Ammonia refrigeration
Halo-carbon refrigeration
VRF
Chilled water
Brine
Domestic cold and hot water
Low-pressure steam

PERFORMANCE

Continuous Usage Range: -200°C to 125°C
Thermal Conductivity (Btu·in./hr·ft2·°F): 0.245
Water Vapor Permeability (Perm·mm): 00.00
Self-extinguishing (ASTM D635)